Home Improvements

How To Clean A Heat Pump

If you own a heat pump, you must know that there is hardly anything out there that competes with it when it comes to efficient and effective heating and cooling. There is no doubt that heat pumps do a good job in keeping your house warm in the winters but that mostly depends on how you perform heat pump repair and maintenance. Now, cleaning is a crucial part of the maintenance process. So, we are going to take a look into how you can clean your heat pump without having to call a professional each time.

Cleaning The Indoor Unit

Cleaning the indoor unit is critical. You will need to grab a vacuum and dusting brush along with some cleaning agents. The first thing you are going to do is unscrew the indoor unit and access it. Remove and inspect the filters. If you haven’t cleaned or replaced the filters in a while, make sure you do that.

To ensure you’re maintaining the air filters as recommended, read the heat pump user’s manual. There is a time limit on using air filters. After it, you should replace the air filters. And when the air filters don’t require replacement, they must be cleaned regularly. And the best thing about it is that you do not need a professional. Simply remove the filter, clean it or replace it.

Once you are done looking after the filters, you will need to move on, inspecting the internal condition of the unit. If there is dust and dirt accumulation, you will need to use a cleaning agent or a soft or hard brush. Spray the cleaning agent on the accumulation and let it sit for a while to let it break down.

Then, use a brush along with a slightly wet cloth to wipe away all the remaining dirt and dust.

Cleaning The Outdoor Unit

In addition to cleaning the indoor unit, you will also need to clean the outdoor unit as this is the main location where most of the essential components are located. However, you will need to be a bit careful this time. First of all, check the surroundings of the outdoor unit and make sure it is clear of vegetation, shrubs, plants, etc.

In most cases, dead shrubs, branches, and leaves end up inside the outdoor unit, which can come in contact with the fan blades and other components, resulting in expensive damage. Moving on, you should inspect the outdoor unit for any rust or corrosion along with leakage.

If you do find some water on the ground, do not panic. A little bit of water on the ground means the unit is working fine and that is simply a result of the heating and cooling process taking place.

Clean The Coils

The condenser and evaporator coils are important parts of your heat pump. This means you will have to be careful around them while cleaning and maintaining them. Coils are designed to disperse heat and if you haven’t cleaned your heat pump in a while, expect some stubborn dirt and dust.

Make sure that you do not use anything sharp or clean the coils in a harsh manner as you can damage them. Simply use a cleaning agent, spray it on the coils and wipe away using a clean cloth.

Hire A Professional

Cleaning and maintaining a heat pump is not a daunting task if you are aware of the basics and possess the skills to do it. However, if it is your first time, then you should probably let an expert do it for you. The reason is, as already mentioned, heat pumps consist of several different components.

Not only can these components easily end up being damaged but also risk injury. Therefore, you should contact a heat pump specialist and let him/her clean the unit inside out. And the best thing about this is that you wouldn’t have to break your bank as the job isn’t too expensive.

Final Word

Cleaning and maintaining your heat pump is necessary for effective and efficient heating and cooling. Make sure that you follow the manufacturer’s recommendations and hire heat pump repair services Huntington, if necessary, to ensure your heat pump performs effortlessly for years to come.

Post Comment

500uaE